How can wind power be fed steadily into the power grid? Deep inside the CGN Shengshan Wind Farm in Sunwu, Heilongjiang, China's northernmost province, the world's first 35 kV high-voltage direct-mounted distributed synchronous condenser is solving the problem.
It acts instantly to stabilize fluctuating voltage and prevents the risk of large-scale blackouts. It can directly raise voltage from 10.5 kV to 35 kV, eliminating the need for a step-up transformer. Its developer, Harbin Electric Machinery Company Limited (HEMC), spent two years and five months to overcome three major challenges and complete this "world's first."
New insulation system
In spring 2024, HEMC took on a challenge no one had tackled: building a 35 kV direct-mounted synchronous condenser. Jin Huiyong, the project's chief professional engineer, likened it to a "super stabilizer" at key grid nodes — instantly injecting or absorbing reactive power to keep the voltage steady when new-energy sources fluctuate or the grid is disturbed.
Raising voltage directly means wrapping each copper conductor in an insulation sheath strong enough to withstand it — and at 35 kV, there was no precedent worldwide.
The HEMC team designed a complete set of mica insulation structures, but they still had to figure out each layer's thickness and how to press the layers together without gaps. To compound the problem, when the voltage rises, electricity "leaks" from both ends of the copper wire and burns the insulation sheath.
Hu Chunxiu, head of the insulation system, and her team camped beside the test bench for over a year. Of each batch of eight test bars, often only two or three passed the trial. After 64 test bars and hundreds of trials, the mica insulation structure was ultimately finalized. On that day, voltage reached nearly three times the rated value, but the curve held steady — no breakdown, no discharge.
Preventing coils from overheating
In autumn 2025 came the second hurdle: the insulation sheath blocked high voltage but also trapped heat. Thicker insulation means poorer heat dissipation, and overheating coils age the insulation.
The team tried making the sheath itself both voltage-resistant and heat-permeable, but the attempts failed. Then an engineer proposed integrating water cooling, having water flow directly through the bars to carry the heat from the core. This became the first application of "air-water cooling" in a synchronous condenser: Water cools where coils generate heat, and air cools where rotor friction does.
While the three-turn water-cooled bar was a world first, joint sealing became a stumbling block — the slightest seepage could cause a short-circuit shutdown. Lei Juchun's welding team built 1:1 mock test pieces and spent six months adjusting parameters, performing flaw detection after each weld, and starting over after each failure. In the end, all joints passed flaw detection at the first attempt, and the machine passed the airtightness test, with not a drop leaked.
Stabilizing the grid
By 2026, the grid had become "lighter." Traditional grids rely on massive generator rotors — iron lumps weighing tens to thousands of tons — whose spinning inertia buys seconds before collapse when voltage fluctuates. But solar panels don't rotate, and wind power passes through electronic converters with no rotational inertia. The synchronous condenser is the ballast that adds weight back.
Structural design engineer Shi Shilei's team halved the rotational speed and made the rotor thicker and heavier, achieving six times the inertia of older models. But slower speed means a bigger machine, constrained by the wind farm's nacelle and transport corridors. The team innovatively adopted a three-turn bar structure that accommodates 35 kV while slimming the machine — offsetting the inertia loss.
On June 27, the final assembly passed the test, and the voltage was raised to the design limit with the parameters holding steady. The machine was then shipped to Sunwu, and on August 16, connected to the grid. The 168-hour continuous full-load trial run passed on the first attempt.
Data showed that short-circuit capacity has more than doubled and the short-circuit ratio is up 50 percent, which means the system is stronger and more stable. The inertia support rose by 70 percent, and wind farm capacity has doubled from 100,000 kW to 200,000 kW.
This equipment is an efficient domestic solution to ensure stable control in high-proportion new energy power grids — a "key cornerstone" of the new-type power system, said Cai Wei, a national outstanding engineer and professor at Harbin University of Science and Technology.